Table of Contents
Advertisement
8
Use
to Select your preferred picture setting, then press OK.
Please select your preferred picture mode.
Skip
9
Use
to Select your preferred sound setting, then press OK.
Please select your preferred sound mode.
1
Skip
10
After Picture and sound setup is completed, A message will appear
if there is the latest software on the network server.
Note(s)
•
If you are not receiving a signal from your Cable service, contact the Cable provider.
•
If you press
during autoprogram, this setup of TV channels will be cancelled.
•
The Initial Autoprogram function can be executed for either Antenna or Cable only once. When
you change the connection (Antenna / Cable), select Search for channels again.
A A fter an Initial Setup is completed...
•
•
Standard
Vivid
Sports
1
2
•
•
•
Standard
Vivid
•
Sports
2
•
p. 34
If you want to scan the channels Automatically again.
p. 34
Search for channels
You can add the desired channels not memorized by Autoprogram
through antenna connection.
p. 34
Weak channel installation
If you want to change to another Language.
p. 32
Language
If you want to change the country setting.
p. 47
Country
If you want to change the Location setting.
p. 32
Location
If you want to change the network setting.
p. 37
Connect to network
If you want to restore the picture and sound setting.
p. 27
Picture and sound setup
17
.
English
Advertisement
Table of Contents
