Miele@Home - Miele DGC 7440 Operating And Installation Instructions

Miele@home

The steam oven is a Miele@home
compatible appliance. Your steam
oven is fitted ex-works with a Wi-Fi
communication module and is suitable
for wireless communication.
There are a number of ways of
connecting your steam oven to your Wi-
Fi network: We recommend connecting
your steam oven to your Wi-Fi network
with the help of the Miele@mobile App
or via WPS.
After installing the Miele@mobile App
on a mobile device, you can do the
following, depending on your appliance:
– Operate your appliance remotely
– Call up information on the operating
status of your appliance
– Call up information on the
programme sequence of your
appliance
– Set up a Miele@home network with
other Wi-Fi enabled Miele appliances
– Activate
This setting is only visible if
Miele@home is deactivated. The Wi-
Fi function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the Wi-
Fi function is switched off.
– Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the Wi-Fi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a Wi-Fi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
– Reset
This setting is only visible if a Wi-Fi
network has already been set up. The
Wi-Fi function is deactivated and the
Wi-Fi network will be reset to the
factory default. You must set up a
new connection to the Wi-Fi network
to be able to use Miele@home.
–
Set up
This setting is only visible if there is
no existing Wi-Fi network. You must
set up a new connection to the Wi-Fi
network to be able to use
Miele@home.
Settings
45