infobit BV40 Quick Start Manual

BV40 Video Conference Camera with Expansion Microphone(s)
Controls and Functions
< Front View >
Functions LEDs indicator
The indicator lights up when using the device.
Lens
( 4K )
< Rear View >
DC IN 12V Power supply interface
< Top View >
Functions of the buttons on the top
1
Connection indicator
2
Microphone mute
4
Volume down
Buttons Indicator status
1
Orange LED lights
Connection indicator
Blue LED flashes
2
Microphone mute
Orange LED lights
3
Speakerphone mute
Orange LED lights
4
Blue LEDs decrease
Volume down
progressively
5
Blue LEDs increase
Volume up
progressively
6
Blue LED lights
Power on/off
Blue LED off
< Wireless Expansion Microphones.Top View(left), bottom View(right) >
2
Power on/off
1
Mute Microphone
Buttons
1
Mute Microphone
2
Power on/off
Press 3 seconds to power on/off
When using the charging tray, the charging
3
Copper ring
copper ring acts as the charging interface.Charging
copper ring contacts spring probe for charging
Red LED flashes
Battery Charging time Standby time Working time
Camera Scroll wheel
Adjust ±15 degrees of the lens
go up and down.
For LAN
For connecting USB3.0 Cable
3
Speakerphone mute Speakerphone mute
5 6
Volume up Power on/off
Functions
Connected to PC successfully via USB
Disconnected
All the mics mute
Speakerphone mute
Volume down
Volume up
Press 3 seconds to power on
Press 3 seconds to power off
3
Copper ring
Functions
Microphone mute
Low battery
2) The audio output of this device use the same USB interface with video and
supports the standard UAC protocol. All the software which supports the UAC
protocol can collect the audio of this device.
3) Daisy-chain max up to 3 wireless expansion microphones connect to main unit
via RF2.4G transmission. Each expansion microphone provides 3 meters pick up
range. To ensure the call quality and echo cancellation effect, please do not move
the expansion microphone after placing it on the table. At the same time,
expansion microphones need a distance at least 1 meter from the speaker.
4) The main unit has an internal auxiliary microphone for emergency use when
the expansion mics are out of power. Expansion mics are recommended for the
best call experience. When any expansion mic is turned on, the internal mic will
be automatically disabled.
Combination Key Function
2) Prompt tone ON/OFF
Prompt tone is turned on by default. Press and hold
turn ON/OFF.
3) Enable or disable the internal microphone
Press and hold for 5 seconds to enable or disable the internal mic
4) Remote upgrade mode
(This function needs the support of the manufacturer, please do not use it
under normal circumstances)
Press and hold for 5 seconds to enter remote upgrade mode, only the
orange indicator of Power button lights.
Press and hold for 5 seconds to exit the upgrade mode.
Pairing Wireless Microphones
microphone close to the main unit.
paired.
Music Mode
What is content in package ?
①Video conference camera * 1 ⑥ USB 3.0 cable 3M * 1
②User's manual * 1 ⑦Power supply of the camera * 1
③Expansion mics * 1-3 ⑧Power supply of the charging tray * 1-2
④Charging tray * 1-2 ⑨USB - type C cable * 1-2
⑤Bracket and screws * 1 ⑩Remote control (no battery) * 1
Remote control's functions
Buttons
1
3 1
2
Power on/off
2
4
Zoom out
3
6 5 Zoom in
4
7 Camera functions'
menu
5
Microphone mute
6
Speakerphone mute
7
Volume up/down
Note: If the remote control is not available, maybe the batteries ran out. Please
change the new batteries(AAA*2pcs) .
VB40
for 5 seconds to
main unit
Functions
Power on/off
Camera zoom out
Camera zoom in
Camera functions' menu (center)
EPTZ control (up, down, left, right)
Microphone mute
Speakerphone mute
"+" volume up; "-" volume down