Related Manuals for infobit iCam 360
Summary of Contents for infobit iCam 360
- Page 1 360 360° All-in-one Conference Camera Quick Start Guide INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 2 The adapter style will vary according to the power requirements from different countries or regions. Please be noted that the picture as below is just for reference only. Quick Start Guide iCam 360 12V 1A Adapter USB Type A To C 1.5m INFOBIT AV www.infobitav.com...
- Page 3 Ⅲ. Start 1. Connect the iCam 360 to the computer and the power supply through the dedicated USB cable and 12V 1A adapter in the accessories, and the camera can be turned on after power on. 2. Press the mode switch button...
-
Page 4: Video Output
5. The video conferencing shuts down when it is powered off. Note: Some video conferencing platforms require you to choose the camera and microphone of iCam 360. Video output 1. Open any video software. Take Zoom as an example to operate as shown in the figure below. -
Page 5: Firmware Update
Studio Camera, iCam 360 Microphone, iCam 360 Speaker, etc. in the general meeting software setting options. If the user chooses Studio Camera, this software can be used in various video conference scenarios. System Requirements: Windows:... - Page 6 If you fail to take the following precautions, you may cause serious injury or death due to electric shock or fire, or cause damage to your iCam 360 Camera. Please check the device and the accessories before using to ensure that they are in good condition. Based on safety guidelines, only the supplied or separately purchased genuine iCam 360 accessories can be used.
- Page 7 ● When using an external power connection, please follow all safety guidelines for third-party power supply equipment. ● The lens of iCam 360 is made of glass. If the lens is damaged, keep it away from children, and be careful when handling it to avoid being scratched by broken glass.