Video conference camera with expansion microphone(s) (2 pages)
Summary of Contents for infobit iCam P20
Page 1
4K Video Conference Camera User Manual English (V1.0) Copyright Notice All contents of this manual, whose copyright belongs to our Corporation cannot be cloned, copied or translated without the permission of the company. Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.
Page 3
6.5 Camera Controlled by WAN ......................14 6.5.1 Setup IP Controlled by Dynamic DNS ................... 14 6.5.2 Dynamic DNS Visit Camera ....................14 6.5.3 VLC Stream Media Player Monitor..................14 6.6 Camera Parameter Setup....................... 15 6.6.1 Homepage Introduction ......................15 6.6.2 Video Settings ........................
environment to avoid any cover (plastic Note material) damage. Make sure there is no obstacle within rotation range. Electric Safety Please never power on before installation is Installation and operation must accord with completed. electric safety standard. Do not Dismantle the Camera Use Caution to Transport We are not responsible for any unauthorized Avoid stress, vibration or soakage in transport,...
Page 5
HDMI Cable (Not Supplied) 3G-SDI Cable (Not Supplied) 3.5mm Audio Cable (Not Supplied) RS485 Cable (Not Supplied) USB Cable (Supplied) RESTORE HDMI 3G-SDI LINE IN RS485 USB 3.0 OUT RS232 IN LAN(PoE+) DC 12V AC Adapter (Supplied) DC 12V IN Power Cable (Supplied) Network Cable (Not Supplied) RS232 Cable (Supplied)
under the condition of ultra-low illumination, it 2) Connect the power adapter to the power still keep the picture clean and clear, and the connector on the rear panel of the SNR of image is as high as 55dB. camera. The power indicator on the front Multiple Interfaces panel of the camera is on.
Page 7
Backlight Resolution 1280x720, 1024x576, Support Compensation 720x480, 720x408, 640x480, 640x360 Digital Noise 3D Digital Noise Reduction Reduction 720x480, 720x408, Second Stream 640x480, 640x360, Signal Noise Resolution ≥55dB 480x320, 320x240 Ratio Horizontal Angle Bit Rate Control CBR, VBR 80.8° ~ 7.5° of View 50Hz: 1fps ~ 50fps, Frame Rate...
4.4 Dimension Physical Parameter Input Voltage DC 12V / PoE (802.3af) Current 1.25A (Max) Consumption Operating -10°C ~ 40°C Temperature Storage -40°C ~ 60°C Temperature Power 15W (Max) Consumption Size 223 x 154.8 x 165 (mm) Net Weight 1.8Kg 4.3 Interfaces and Buttons HDMI 3G-SDI LINE IN...
Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption in standby mode is approximately half of the normal mode 2. Number Key To set preset or call preset. 3. *Key Used with other buttons. 4.
Page 10
[*]+[#]+[F1]: Address 1 [*]+[#]+[4]: Display current IP address [*]+[#]+[F2]: Address 2 [*]+[#]+[6]: Quickly recover the default [*]+[#]+[F3]: Address 3 [*]+[#]+[8]: View the camera version [*]+[#]+[F4]: Address 4 [*]+[#]+[9]: Quickly set up inversion [*]+[#]+[MANUAL]: Restore default IP 13. Reset Key address Clear preset: Erase a preset position.
4.6 RS232 Interface 4.7 VISCA Network Function 4.8 Serial Communication Control RS232 Communication Control The camera is controlled via RS232. The IR OUT RS232 serial port parameters are as follows: Baud rate: 2400/4800/9600/38400; Starting Position: 1 bit The correspondence between the camera and Data bit: 8 bits Windows DB-9 pin: Stop bit: 1 bit...
mode). GUI Settings Bright: 0 ~ 17 (Effective only in Bright mode). 5.1 MENU Gain Limit: 0 ~ 15 (Effective only in Auto, SAE, AAE, Bright mode). Press [MENU] button to display the main menu Anti-Flicker: Off, 50Hz, 60Hz (Effective only in on the normal screen, using arrow button to Auto, AAE, Bright mode).
AF-Sense: Low, Normal, High. 5.4 IMAGE L/R Set: STD, REV. Move the main menu cursor to [IMAGE], and Display Info: On, Off. press [HOME] key enter the image page, as Image Freeze: On, Off. shown in the following figure. Digital Zoom: Off, 2x, 4x, 8x, 16x. IMAGE Call Preset Speed: 1 ~ 24.
GUI menu and parameters are Auto Scan: On, Off. SDI-3G Mode: LEVEL-A, LEVEL-B subject to change without notice. Video Output: HDMI, SDI. Tally Mode: On, Off. 5.8 COMMUNICATION SETUP Move the main menu cursor to [COMMUNICATION SETUP], and press [HOME] key enter the communication setup page, as shown in the following figure.
Network Function 6.1 Operating Environment Operating System: Windows 7/8/10, Mac OS X, Linux, Android Connect by Switch/Router Network Protocol: TCP/IP 6.4 Camera Controlled by LAN Client PC: P4/128M RAM/40G HDD/ support scaled graphics card, support DirectX 8.0 or 6.4.1 Setup IP Address more advanced version.
Method 2: Open “upgrade_En.exe”, change IP and click “Set”. After modified, the video conference camera will be restart. Change IP address: Step 1 Search the IP address of camera. Step 2 Select the camera IP of you want to change. Step 3 Select the config dialog of upgrade applets.
IE browser does not support H5, you need to use VLC plug-in to view videos. Please visit VLC website (http://www.videolan.org/vlc) download and install the 32-bit VLC media player, after it installed, visit video conference camera will have normal image display. Other 6.5.2 Dynamic DNS Visit Camera mainstream browsers already support H5 and do not need to install the VLC plug-in.
6.6.1 Homepage Introduction Menu All pages include two menu bars: Real time monitoring: displaying video image Parameter setup: with function buttons. A. Video Viewing Window Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is.
Page 19
B. PTZ Setup 5) PTZ Presets After manually setting up a shot that you would like to return to later, you can save presets for quick recall of these positions. Type a number between 0 and 254 into the Preset box. Click the "Set"...
6.6.2 Video Settings 6) Bit Rate The user can specify the bit rate. Generally speaking, the larger of the bit rate, the clearer of the image. However, the configuration of the bit rate needs to be combined with the network bandwidth.
1) Brightness 3) Sample Rate Image bright 0 ~ 14, slider control, on the right Optional items: 44.1K, 48K. shows the corresponding numerical. 4) Bit Rate Default value is 7. Optional items: 96K, 128K. 2) Saturation 5) Input Type Saturation 0 ~ 14, slider control, on the right Optional items: LINE IN.
Page 22
1) Lan Settings Default the IP address is 192.168.100.88, the MAC address cannot be modified. 2) Port Settings A. HTTP Port IP address identifies the network device, the device can run multiple web applications, each network program using network port to transmit data, so data transmission to be carried out between the port and port.
7) Multicast Settings with Turn On/Off multicast. Setting the multicast address (default value is 224.1.2.3) and port (default value is 6688, then 6688 is the multicast port of the first stream; 6690 is the multicast port of the second stream). 8) NTP Settings Turn On/Off NTP time sync, main time show and sub time show.
Page 24
diluted neuter detergent. Do not use any download and install the 32-bit VLC media player, after it installed, visit video conference type of solvents, which may be damage the camera will have normal image display. Other surface. mainstream browsers already support H5 and Unqualified Application do not need to install the VLC plug-in.
Page 25
CONTACT US INFOBIT AV www.infobitav.com info@infobitav.com...