Change Wi-Fi Security Types
You can set the OBD2 device's Wi-Fi security types from the 4G Mobile Hotspot configuration
page.
•
Log in as Administrator.
•
Select Settings > Wi-Fi Settings.
•
Select the desired security types for the Wi-Fi network. (It is recommended that you use
WPA2-PSK whenever possible.)
•
The Security Type (the most common mode) are:
•
WPA2-PSK --other users can access your OBD2 device only if they enter the correct
password (default)
•
WPA-PSK/WPA2-PSK-- WPA Pre-Shared Key (WPA-PSK).
•
SHARED-- Shared Key Authentication, a type of WEP Encryption.
•
OPEN--Not recommended. Anyone can access your Wi-Fi network without a
password and you are responsible for charges incurred.
20