4
Connect the power cord to the unit
Power cord
Power switch section
Power switch section
5
Turn on the power and raise the backrest to the upright position
❶
●
Inser the power plug into the power
outlet
●
Always be sure to insert into an AC 220 V plug.
❷
●
Confirm the lock switch key
is set to the open position.
●
❸
Confirm the power switch is
set to the on position.
●
❹
Press
twice.
●
Press once, and then press again
1 second later.
Backrest will rise automatically.
00_SHW150617_MA81.indb
11
❶
●
Appliance inlet
Connector
❷
●
●
❸
GROUNDING INSTRUCTIONS
●The unit must be properly grounded. If it should malfunction or
break down, grounding provides a path of least resistance for
electric current in order to reduce the risk of electric shock.
●
This unit is equipped with a cord with an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that has been properly installed in accordance
with all local codes and ordinances.
on the controller
Approx.
Check for dirt and damage on appliance
inlet of the power switch section and the
connector of the power cord.
Insert the connector into the
appliance inlet.
Be sure to push the connector in all
the way.
❶
●
Keep feet from
the power cable.
❸
●
❷
●
EN11
2015-12-30
11:19:52