Fujitsu PRIMERGY RX2520 M5 Operating Manual page 30

Product description
Pos. Label Indicator
AC
6 connected
indicator
iRMC-related status signals
Global error
ID indicator
indicator
flashing blue off
flashing blue flashing orange
30
Status Description
– The server is switched off and
connected to the mains (standby
mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
green on
specified time.
I
– The server is switched off and not
connected to the mains.
off
– The server is switched on and
operating normally.
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
I
For more information on the
emergency flash of the iRMC
firmware, see the "FUJITSU Server
PRIMERGY RX2520 M5 Upgrade
and Maintenance Manual".
Operating Manual
After connecting the server to
the mains, it will take about 60
seconds until the server will
enter standby mode and can
be switched on.
RX2520 M5