Malfunction And Warning Messages In The Multifunction Display - Mercedes-Benz CLK 430 Operator's Manual

Malfunction and warning messages in the
multifunction display
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
These messages can be cleared from the instrument
cluster by:
• using the J button on the instrument cluster, or
• pressing button j, k, è or ÿ on the
multifunction steering wheel.
They are then stored in the malfunction message
memory. See page 106.
Malfunction and warning messages
Instruments
Operation
and controls
Instrument
Driving
cluster display
Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Temporary messages such as "SWITCH OFF LIGHTS"
will not be stored in the malfunction message memory.
Warning!
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
233
Practical hints Car care
Technical
Index
data