Table of Contents
Advertisement
GENERAL INSTRUCTIONS FOR SAFE OPERATION
6
2 General instructions for safe operation
2.1 Obligations of the operator/owner
The operator/owner must ensure that all the specified limits, ambient conditions,
and clearances in the vicinity of the machine are observed at the place of installation.
Prior to commencing operation of the machine:
• The machine operator must understand the dialog language of the control sys-
tem user interface.
• The personnel responsible must be sufficiently qualified to perform the work
assigned to them. This applies particularly to commissioning, maintenance and
servicing, as well as any working on electrical equipment and components.
• All safety equipment must be properly attached and functional; it must not be
tampered with or disabled.
• Devices and measures to override the restricted access to the controller (e.g.,
keys for switches, passwords) must be accessible only by authorized personnel.
• The machine must be in proper functional condition. Any damaged or defective
parts must be replaced immediately. This applies particularly to all safety equip-
ment.
2.2 Personnel obligations
The personnel responsible must read and understand the user documentation in-
cluding the caution labels. This applies particularly to the safety labels and warnings.
Before starting work, all those operating the machine or who are assigned work on
the machine must commit to do the following:
• Follow the basic regulations on occupational safety and accident prevention.
• Comply with the safety chapter and the warnings in the user documentation.
This requires them either to read the relevant sections or to receive instruction
about their content.
All those carrying out work on the machine must use the required personal protec-
tive equipment.
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
Hide quick links:
Advertisement
Table of Contents
