Storage And Decommissioning; Disposal - Index Traub ABC Operating Instructions Manual

SAFETy INSTRUCTIONS FOR dIFFERENT LIFE PhASES
Safety Precautions and Technical Details
DAA007EN - 11.05.2021
The machine operator/owner is responsible for compliance with the laws and regula-
tions of the country of use with regard to the use of hydraulic hoses.
We recommend inspection and documentation of the hydraulic hose lines installed
inside the machine and not directly visible every 12 months. For hydraulic hose lines
which are visible in the work area or which are mounted outside the machine and
which connect components to the machine, we recommend inspection and docu-
mentation every 6 months.
Flexible, pressurized hydraulic hose lines of INDEX/TRAUB equipment are generally
thermoplastic or metal hydraulic hose lines.
For the flexible, pressurized hydraulic hose lines used by INDEX/TRAUB, empirical
values are available for very different periods of use, some of which exceed 10
years.
If the machine was disconnected from the power supply, the main switch must
be switched off and locked out (e.g., using a padlock) before the power supply is
reconnected.
After all maintenance and repair activities and work on electrical assemblies are
finished, a test run or functional check must be performed.

6.6 Storage and decommissioning

The following must be observed if the machine will not be used for an extended
period of time:
• Move tool carriers to their bottom end position.
• Switch off the machine and lock it out.
• Close and secure all covers and doors.

6.7 Disposal

For the disposal of the machine as well as machine parts, consumables, coolants,
and operating fluids, the applicable regulations and directives must be observed.
The disposal of the machine may only be carried out by personnel trained for this
purpose. If necessary, a specialist company must carry out the disposal.
41