Error Codes - Hitachi BD-W70MSP Operating & Installation Instructions Manual

Front loading washing machine
Table of Contents

Advertisement

Code
C01
unt of
Water is not
supplied.
the
C02
Water is not
drained.
ver
er.
unt of
re
C04
Spin cycle does
not function.
d
ot
s
hine.
Wait
start
r
ram.
C08
Door lock does
not function.
unt of
C09
Door unlock does
not function.
s
ne on
C14
Malfunction of
e.
vibration sensor
ch as
rum.
C18
Spin cycle does
not function.
C19
Over loaded
C30
Water flows out
from drain hose
while washing.
Description
Water tap may not be turned on.
Water inlet filter may be clogged.
Water line or water hose may be frozen.
Water supply may be cut off.
Drain hose or drain pump may be clogged.
Drain hose may be kinked or frozen.
Drain hose may not be set correctly.
Height of the drain outlet may be too high.
Clothes may be imbalanced in the drum.
You may be washing only one heavy item
such as a cotton blanket or jeans, or small
items in a laundry net.
You may be washing too many large items
such as bed sheets.
The washing machine may be installed on
a slanting floor or may not be level.
You may be washing waterproof or anti-
slip treated items.
ÆPage 9 : Before You Start Washing
(Sorting the laundry)
The door may be open.
The door may not be closed completely.
Laundry may be exceeded 7 kg and door
is pushed from inside.
There may be other appliances that
generate electrical noise near the washing
machine.
The drain hose may not be set correctly.
There may be too much foam in the drum.
Laundry may exceed rated capacity.
Drain hose end is set lower than 60 cm.

Error Codes

Possible Cause
Solution
Check water tap, water
inlet filter, water line and
water hose.
Check drain hose, drain
pump and drain outlet.
If C02 still appears after
removing the possible
cause, please contact
your local service center
for repair.
Add a few clothes to the
drum. (Spinning only
one item may result in
imbalance.)
Check the door and
close firmly.
Switch power off and
press the door to close
tightly. Hold that position
and switch power on,
and wait until the door
lock is released.
Move the appliances
away from the washing
machine.
Same as in C02.
See page 14 for max.
load of each program.
See page 23 for proper
height on drain hose
setting.
21
3WPL073551-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents