Error Codes How to Install the Washing Machine Customer Service Consumption Values Specifi cations Thank you for purchasing a Hitachi front loading washing machine. ■ Please read these operating & installation instructions carefully for proper operation of the machine. ■...
Environmentally Friendly Waste Disposal The shipping package has protected your new washing machine on its Disposing of the way to your home. All materials are ecologically harmless and recyclable. packaging Please contribute to a better environment by disposing of packaging materials in an environmentally conscious manner.
Safety Instructions Before operating the washing machine, please read these safety instructions carefully. Warning Issues which could cause death or serious injury ■ Do not dismantle, repair or modify the appliance. General safety This could cause malfunction, fi re, electric shock or injury. For repair, please contact your local service center.
Safety Instructions ■ Keep packaging out of reach of children and babies. Child safety Danger of suffocation. ■ Do not let children climb onto the washing machine or open the drum door, and do not leave a box or chair near the washing machine which could enable children to climb onto it.
Product Descriptions Detergent Dispenser Softener Cap Dispenser : For fabric softener Dispenser : For prewash Dispenser : For main wash Drain Hose Control Panel Door Handle Door Lock Power Cord Emergency Door Lock Release Drain Tube Drain Filter Filter Cover Adjustable Feet (4 pcs.) Packed-In Accessories Hose Guide...
Control Panel and Display Power button Start/Pause button Jog Dial Spin button Mode button Timer button (Child Lock) Auto Self Clean button Display Press this button to switch power on and off. If no program is selected or Power button no button is pressed for 10 minutes, the washing machine automatically switches itself off.
Page 8
Control Panel and Display Automatically cleans the outside of the tub and the inside of the outer tub Auto Self Clean button to keep the washing machine clean. The setting is switched off at the time of shipment from the factory. Once it is switched on, the Auto Self Clean function operates every time you do your laundry.
Control Panel and Display The following indications are displayed when washing time is prolonged due to : ● Excessive foam in the drum. Pouring in extra water to remove excessive foam. Extra Rinse option LED lights up, and three horizontal bars light up in order. ●...
Page 10
Before You Start Washing ■ Use the amount of detergent recommended on the detergent package. Detergent and The type and amount of detergent depends on the type of fabric, load additives size, degree of soiling and hardness of the water used. Use less detergent if : - you wash a small load.
How to Use the Washing Machine Sort and load ■ Sort the laundry according to type of fabric, care label symbol, color the laundry and degree of soiling. Page 9 : Preparation of the washing. ■ Do not exceed the maximum load. ■...
Page 12
How to Use the Washing Machine ■ Pausing a program. Press the Start/Pause button. The washing machine switches itself off if it is not restarted within 1 hour. Switch the power on and the program starts again from the beginning. ■...
Page 13
How to Use the Washing Machine 1. Press the Power button to turn on the power. How to 2. Select a program. use the 3. Press the Auto Self Clean button, and then press the Auto Self Clean Start/Pause button. function ■...
Page 14
Program Ov Program Max Load Spin Setting Type of Laundry / Notes 400-1000r/min, For washing of cotton and linen items with an eco-friendly ECO Cotton 7.5 kg No Spin (cold water setting only). Rinse Hold 400-1000r/min, Cotton 90ºC 7.5 kg No Spin Rinse Hold 400-1000r/min,...
Page 15
ram Overview Selectable Options dry / Notes Auto Self Prewash Timer Clean Quick Extra Rinse eco-friendly operation by not using a heater ch as shirts, underwear, towels, bed linen saves energy and water that provides the gram. c. made of polyester, acrylic or blends with s bearing the Woolmark label.
In Case of Emergency The washing machine features a Fully Auto Restart function. In the event of a If the power is shut off part way through a wash, the cycle (wash/rinse/ power outage spin) at the time is memorized, and when power is restored, the same cycle automatically restarts from the beginning.
Care and Maintenance Cleaning the Drain tube drain fi lter Drain fi lter Filter cover Risk of injury! Hot water may come out from the drain tube and drain fi lter. - Do not open the drain fi lter when a program is running. - Do not clean the drain fi...
Page 18
Care and Maintenance 1. Remove the detergent dispenser. Cleaning the detergent Push the dent dispenser Pull the detergent dispenser while pushing the dent. 2. Remove dirt or detergent remaining in the detergent dispenser casing with a brush. Detergent dispenser casing 3.
Troubleshooting Problem Possible Cause Solution ● ● Door cannot be There is still some water in the washing Run the Drain program to opened. machine. drain water. ● ● Child lock may be activated. Deactivate the child lock. (See page 8) ●...
Page 20
Troubleshooting Problem Possible Cause Solution ● ● Foam remains You may have used too much detergent. Use the appropriate amount of ● on the door or Laundry is new or not that soiled. detergent. the door seal. ● ● Fabric softener You may have exceeded the max.
Error Codes Code Description Possible Cause Solution ● Water is not Water tap may not be turned on. Check water tap, water ● supplied. Water inlet fi lter may be clogged. inlet fi lter, water line and ● Water line or water hose may be frozen. water hose.
How to Install the Washing Machine ■ The washing machine is heavy. Use caution when lifting it. Safety Instructions ■ When lifting the washing machine, do not hold the jog dial or the detergent dispenser casing. Lift the washing machine with two persons holding the bottom and the back of the washing machine.
Page 23
How to Install the Washing Machine ■ Remove the four transport bolts and insert the cover caps using the Removing the packed-in 13 mm box spanner. transport bolts ■ The transport bolts must always be removed before using the washing machine for the fi...
How to Install the Washing Machine Water supply hose ● Connecting the water supply ■ Optimum water pressure is 0.03-0.8MPa. ■ Do not connect to the mixer tap of an unpressurised hot-water apparatus. ■ Use a horizontal tap. Horizontal tap Extension tap Square tap Connect the water supply hose to the rear panel of...
How to Install the Washing Machine ■ Make sure that the union nut between the water supply hose and main unit is tightly screwed. ■ Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur. ●...
How to Install the Washing Machine ■ Connect the washing machine to an alternating current via a correctly Connecting the installed earthed socket only. power ■ The mains voltage must correspond to the voltage specifi cation on the washing machine. ■...
Page 27
How to Install the Washing Machine ■ You need a space of 600 mm (W) x 560 mm (D) x 850 mm (H) with at Under-counter least 3 mm of clearance on the sides, above and back. installation ■ If the height of the space ranges from 823 mm to 852 mm, use upper plate (sold separately).
Before calling, make a note of the model name, serial no. and purchase date of your washing machine. You can fi nd the model name and serial no. on the label attached to the fi lter cover. Model Name: BD-W75TSP Serial No: XXXXXXXX 3WPL091181.indd 28...