Error Codes - Hitachi SF-P100XAV Operating & Installation Instructions Manual

Error
Description
code
C0 Laundry
overload
C1 Water is not
supplied
C2 Water does not
drain
C3 The tub does
not spin or stops
spinning
C4
The lid cannot be
C8
locked
C9 The lid lock
cannot be
released
Ch The spinning
speed does
not reach the
specifi ed value.
■
If warning sign such as "F1", "F9"...etc. are shown in the display, stop operating the washer
immediately and contact an authorized service dealer or a service agent for further inspection
and/or repairing.

Error Codes

Things to check
●
Check if the laundry overloaded?
●
Is the tap open?
●
Has dirt collected in the water supply inlet
fi lter?
●
Are the water pipes or water supply hose
frozen?
●
Has the water supply been disrupted?
●
Is the drain hose blocked?
●
Is the drain hose twisted, crushed, or
frozen?
●
Is the drain hose connected correctly?
●
Is the drain outlet too high?
●
Is the lid open?
●
Is the laundry all on one side of the tub?
●
Does the laundry include too many thick
items like cotton blankets or jeans or too
many large items like sheets?
●
Is the washing machine wobbling, or is the
fl oor under the washing machine slanted?
●
Are there any unwashable things in the
tub? →Page 8: Preparation of the laundry
(sorting the laundry)
●
Is the lid closed?
●
Are there any foreign objects in the lock?
●
Are there any foreign objects in the lock?
●
Check if there is too much powder
detergent?
●
Check if the drain hose is clogged?
●
Check if the drain hose is installed
correctly?
Solution
Decrease the amount
of laundry according to
the instructions on page
15-17.
Check the tap, water
supply inlet fi lter, water
pipes, and water supply
hose.
Check drain hose, drain
pump and drain inlet.
Close the lid.
Large loads may require
reloading the laundry -
evenly dispersed around
the tub, without tangles.
A small load may need a
few more items added.
(If there is only one item
in the tub, it is likely to
become unbalanced.)
Check that the lid is
completely closed. Check
that there are no foreign
objects in the lock.
Turn the power off and
then on again and wait a
little while. If the lid is still
locked, contact a service
center for repair.
Check the amount of
powder detergent used.
Check the drain hose
and its installation.
25