Hitachi BD-W70MSP Operating & Installation Instructions Manual page 18

Cleaning the
detergent
dispenser
Cleaning the
water inlet filter
Maintenance
of the washing
machine
18
3WPL073551-1
Care and Maintenance
1. Remove the detergent dispenser.
1 Push the dent
2 Pull the detergent dispenser while pushing the dent.
2. Remove dirt or detergent remaining in the detergent dispenser casing
with a brush.
Detergent dispenser casing
3. Wash the detergent dispenser with water. Use a brush for narrow parts
or parts from which it is difficult to remove dirt.
■
How to remove and set the softener cap.
Pull up to remove
1. Turn off the tap.
2. Remove the water supply hose from the rear panel of the washing
machine.
3. Remove the water inlet filter and clean with a brush.
4. Return the water inlet filter and the water supply hose to their original
positions.
■
External cleaning
Clean the surface of the washing machine with a soft cloth. Do not use
solvents such as alcohol or benzine.
■
Descaling
The water in some areas is hard and contains lime, so it is recommended
to use a water softening agent periodically, or use a descaler according
to the descaler manufacturers' instructions. Do this separately from any
laundry washing.
■
After each wash
Leave the door open for a while to dry the drum. This helps to prevent
the growth of mold and stagnant smells forming inside the washing
machine.
■
Maintenance wash
It is recommended to run the Cotton 60ºC program regularly. Using this
program keeps the drum clean and prevents the growth of mold.
Push down firmly to set
Water inlet filter
Pull out to
remove
Door
open
Butto
work.
Wate
supp
Displ
rema
chan
There
hardl
There
foam
Deter
dispe
wash
Rinsi
befor
finish
The d
rotate
during
Spin
repea
and s