Cables - Raisecom iTN201 Hardware Description

4

Cables

This chapter describes cables used by the iTN201, including the following sections:
Fiber

Ethernet cable

Erro! Fonte de referência não encontrada.

Configuration cable

DC power cable

AC power cable

Grounding cable

Before installing and operating the iTN201, check accessories contained in the packing box
based on the shipping list. The followings are cables required for the iTN201. Some cables are
not delivered with the iTN201. If required, prepare them based on the cable specifications.
4.1 Fiber
4.1.1 Introduction
The iTN201 supports single-mode or multi-mode fiber.
Table 4-1 lists fiber connectors.
Table 4-1 Fiber connectors
Local connector
LC/PC
LC/PC
LC/PC
Remote connector
LC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
FC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
SC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
Address : Raisecom Building, No. 11, East Area, No. 10 Block, East Xibeiwang Road, Haidian
District, Beijing, P.R.China
Fax: 8610-82883056
Fiber
Postal code: 100094 Tel: +86-10-82883305
http://www.raisecom.com Email: export@raisecom.com