HERO PLEASURE Manual page 24

The recommended "cold" tyre pressures are:
Rider only
2
Front
1.50 kgf/cm or 22 psi
2
Rear
2.00 kgf/cm or 29 psi
1
CAUTION
Over inflation / Under inflation will affect
the performance.
Inspection
Whenever you check the tyre pressure,
you should also examine tyre treads & side
walls for wear, damage & foreign objects.
Rider and Pillion
2
1.50 kgf/cm or 22 psi
2
2.50 kgf/cm or 36 psi
Look for :
Bumps or bulges in the side of the tyre
or the tread. Replace the tyre if you find
any bumps or bulges.
Cuts, splits or cracks in the tyre. Replace
the tyre if you can see fabric or cord.
Excessive tread wear.
Carefully inspect the tyres for any
damage, if the scooter hits a pothole or
hard object.
Tread wear
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are :
Minimum tread depth:
Check the tread wear indicator for tyre wear.
(1) Tyre wear indicator
21
Front: 1.5 mm
Rear: 1.5 mm
(2) Arrow mark