Nvidia Mellanox ConnectX-4 Lx User Manual page 25

In case your machine has an unsupported network adapter device, no firmware update
will occur and one of the following error messages below will be printed. Please
contact your hardware vendor for help on firmware updates.
Error message 1:
Device #1:
Device Type:
Part Number:
Description:
no bracket; ROHS R6t
PSID:
PCI Device Name: 0b:00.0
Base MAC:
Versions:
Status:
Error message 2:
The firmware for this device is not distributed inside Mellanox driver: 0000:01:00.0 (PSID:
IBM2150110033)
To obtain firmware for this device, please contact your HW vendor.
4. If the installation script has performed a firmware update on your network adapter,
complete the step relevant to your adapter card type to load the firmware:
• ConnectX-5/ConnectX-5 Ex - perform a standard reboot
Otherwise, restart the driver by running:
After installation completion, information about the Mellanox OFED installation, such as prefix, kernel
version, and installation parameters can be retrieved by running the command /etc/infiniband/info.
Most of the Mellanox OFED components can be configured or reconfigured after the installation, by
modifying the relevant configuration files. See the relevant chapters in this manual for details.
The list of the modules that will be loaded automatically upon boot can be found in the /etc/infiniband/
openib.conf file.
Installation Results
Software
ConnectX4-Lx
MCX4431A-GCAN
ConnectX-4 Lx EN adapter for OCP; 50GbE single-port QSFP28; PCIe3.0 x8;
MT_2190110032
0000e41d2d5cf810
Current Available
FW 16.22.0228 N/A
No matching image found
/etc/init.d/openibd restart
• Most of MLNX_OFED packages are installed under the "/usr" directory
except for the following packages which are installed under the "/opt"
directory:
• fca and ibutils
• The kernel modules are installed under
• /lib/modules/`uname -r`/updates on SLES and Fedora
Distributions
• /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and
other Red Hat like Distributions
25