Troubleshooting Guide - Karaoke Night KN200BT User Manual

Bluetooth cdg karaoke system
Table of Contents

Advertisement

If you experience difficulties in the use of this Karaoke System please check the following or call
1-800-777-5331 for Customer Service.
PROBLEM
No power when
plugged in
CD/CD+G
PLAYER does not
work normally or
the LED TRACK
DISPLAY shows
"no" or "Er "
No sound through
TV or home
stereo
No song lyrics
appear on the TV
screen

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
AC adapter is not plugged into
the AC outlet.
The AC outlet may not have
power.
Disc inserted upside down.
Cable plugged into AUX IN
jack.
Disc is dirty.
Disc is scratched or warped
A non-standard disc is inserted. Only use discs bearing identification logos.
Lens is dirty.
Moisture has accumulated
inside the CD mechanism.
Karaoke System needs to be
reset.
MASTER VOLUME CONTROL
control is set to minimum.
Volume control on TV set or
home stereo is set to minimum.
TV set or home stereo power is
OFF.
Source selection on your TV or
home stereo is not set properly.
Improper connection to the TV
or home stereo system.
Video cable is not connected
properly to the TV.
"Source" selector on TV is not
set to VIDEO or A/V IN
TV does not have video line
input.
Insert the AC adapter into the AC outlet.
Check the outlet with a working lamp or
other electrical appliance.
Insert disc correctly.
Remove AUX IN cable
Wipe it clean with soft cloth.
Use a new disc.
Clean the optical pickup with a CD lens
cleaner.
Wait about 20 to 30 minutes to let it dry out.
Disconnect the machine from power source
for at least 3 minutes.
Turn up the MASTER VOLUME CONTROL.
Turn up the volume of the TV set or home
stereo.
Turn on the power at TV set or home stereo.
Select AUX IN as the source for your TV or
home stereo.
Follow directions on "Connecting Audio to
TV or Home Stereo" section for connecting
to a home stereo system correctly.
Connect the video cable to the VIDEO OUT
of the unit and to the TV VIDEO IN jacks.
Use your TV Remote to select VIDEO or A/V
input.
Connect from VIDEO OUT of the unit to a
RF modulator and then to the TV cable
13
SOLUTION

Advertisement

Table of Contents
loading

Table of Contents