Table of Contents
Advertisement
entries.
USING MICROPHONES/ECHO/BALANCE/AVC/DIGITAL KEY CONTROL
•
MICROPHONE : When either one or two Microphones are plugged into the MIC 1 jack / MIC 2
jack, their output is mixed with the playback from CD/CD+G discs.
•
MIC VOLUME: Adjust corresponding MIC VOLUME knob for best balance between playback
and microphone (singing) levels.
•
ECHO : Adjust ECHO to add depth and richness to vocals.
•
BALANCE : Adjust BALANCE for balance between the pre-recorded singer's voice and the
music if you are playing a multiplex karaoke disc.
•
AVC : Press the AVC (Automatic Voice Control) button to ON if you want the original singer's
voice to stop while you are singing. The original singer's voice will resume immediately when
you pause your singing.
•
DIGITAL KEY CONTROL: Adjust accordingly to be able to sing at your desired pitch.
The Bluetooth feature enables you to stream and play the digital music on your Bluetooth enabled
device to your Karaoke Machine.
1.
Press the SOURCE button to select the Bluetooth function, "bt" will appear in the LED TRACK
DISPLAY.
2.
The unit will start in auto connection mode and search for a previously paired device that is
active and in range (30 feet/10 meters) with the "bt" display flashing at a rate of about once per
second. If found, a brief welcome melody will be heard and "bt" display will stop flashing. If no
active device is found within 20 seconds, the unit will switch to interactive pairing mode and the
"bt" display flashing rate will speed up to 3 times per second.
3.
To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device and
enable the search or scan feature to find "KN200BT" in the list of discoverable Bluetooth devices.
Select the "KN200BT" from your available device list when it appears on its screen and a brief
welcome melody will be heard if pairing and connection is successful.
4.
If no successful pairing and connection is made in 5 minutes, the unit will enter manual pairing
mode and the "bt" display will flash slower. You need to press the PAIR button to initiate a
pairing/connecting request to a new or old Bluetooth enabled device. Follow step #3 to complete
the process.
5.
After successfully pairing and connecting your device with the Karaoke Machine you can now
play music from your Bluetooth enabled device wirelessly to it.
6.
Rotate the MASTER VOLUME CONTROL on the Karaoke Machine to increase the listening
volume gradually until the desirable level is reached.
Notes:
•
The Bluetooth function of the Karaoke Machine will remain paired unless the paired device goes
out of range of 30 feet (10 meters). If the broken link is re-established with 20 seconds, the
KN200BT will reconnect to the current paired device automatically, otherwise you will need to
make a manual connection again later.
•
If you want to connect the KN200BT to another new external Bluetooth enabled device while it is
paired and connected with another device, you need to press the PAIR button once to terminate
the current connection first. A low pitch disconnection melody will be emitted from the Speakers if
linkage is successfully terminated. The "bt" icon will now flash in the LED Display to get ready for
a new pairing. Repeat step #3 above to make a new link.
•
If you need to switch between different paired devices that are all in range and with Bluetooth
functions enabled, press the PAIR button once to break the current connection and allow
BLUETOOTH OPERATION
11
Advertisement
Table of Contents
