Table of Contents
Advertisement
alternative Bluetooth connection from the other paired device.
•
Refer to manual of your smartphone or external Bluetooth enabled device for correct Bluetooth
operation instructions since it may vary from model to model.
•
If your Bluetooth enabled device does not support A2DP, it will not play the music through the
Karaoke Machine even after it is paired and connected successfully.
•
If you are pairing and connecting your personal computer to the Karaoke Machine using
Bluetooth, you may need to set the KN200BT as your computer's default sound device.
This feature allows you to listen to an external audio source through the speakers of this unit.
1. Plug the included 3.5mm audio cable into the headphone jack of your external audio player (not
included) and connect the other end (3.5mm plug) into the AUX IN jack on the rear side of this
unit.
2. Make sure both units are turned on.
3. Use the SOURCE button to select AUX IN mode and "AU" will appear in the LED TRACK
DISPLAY.
4. Play a song on your MP3 or MP4 player.
5. Adjust the volume control of your audio player and then the MASTER VOLUME CONTROL of
the unit to obtain the desired audio sound level.
6. Turn off both the external audio player and this unit after use.
If the system does not respond or exhibits erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
microcontroller to shut down automatically. If this occurs, simply disconnect the AC adapter and
remove all the batteries. Wait for at least 3 minutes and then set up the unit again as if you were
using it for the very first time.
1.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
2.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3.
Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
4.
If drop-outs or interruptions occur in the music during CD play, or if the CD fails to play at all, its
bottom surface may require cleaning. Before playing, wipe the disc from the center outwards
with a good quality lint-free cleaning cloth.
USING AUX IN FUNCTION
RESETTING THE UNIT
CARE AND MAINTENANCE
12
Advertisement
Table of Contents
