Advertisement
Advertisement
Table of Contents
Related Manuals for Karaoke Night KN355
Summary of Contents for Karaoke Night KN355
- Page 1 CD+G KARAOKE SYSTEM KN355 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE. For further information on this model and the entire lineup of Karaoke Night products, please visit www.karaokenightusa.com...
-
Page 2: Compliance With Fcc Regulations
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE • As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. • Stop operation immediately if any liquid or solid object should fall into the cabinet. •... - Page 3 Model Number: KN355 Serial Number : ___________________ CONTENTS OF YOUR PRODUCT KN355 CD+G Karaoke System x 1 set A/V Cable (4 feet) x 1 pc...
-
Page 4: Protect Your Furniture
PROTECT YOUR FURNITURE!! This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’... -
Page 5: Location Of Controls
LOCATION OF CONTROLS FRONT PANEL CD DOOR STOP BUTTON POWER ON/OFF BUTTON WITH PROGRAM BUTTON INDICATOR DIGITAL KEY CONTROLS / MASTER VOLUME CONTROL SKIP BUTTONS MIC 1 / MIC 2 VOLUME CONTROLS REPEAT BUTTON MIC 1 / MIC 2 INPUT JACKS MONITOR ON/OFF BUTTON CD+G INDICATOR LIGHT SHOW BUTTON... -
Page 6: Power Sources
REAR PANEL MICROPHONE HOLDER (RIGHT SIDE) AUX-IN JACK (3.5mm) BRIGHTNESS CONTROL KNOB (To adjust monitor brightness) CONTRAST CONTROL KNOB (To adjust monitor contrast) V-HOLD CONTROL KNOB (To adjust picture scrolling) DC JACK DC12V MICROPHONE HOLDER (LEFT SIDE) AUDIO OUTPUT JACKS (WHITE CODED FOR LEFT, RED CODED FOR RIGHT) VIDEO OUTPUT JACK (YELLOW CODED) POWER SOURCES AC OPERATION... -
Page 7: Using Aux In Function
connections and the Yellow is for video. Modern flat panel digital TV sets and home music systems are usually equipped with corresponding color-coded RCA jacks to assist correct connections. Make sure that you have a CD+G disc in the karaoke system playing when you are making this connection. You will know you have the proper settings on your TV as soon as you see the lyrics on the screen. -
Page 8: Connecting The Microphone
CONNECTING THE MICROPHONE WARNING - Tapping or dropping the microphone while it is on can permanently damage your microphone. Do not swing the microphone around by the cord. Note: To prevent feedback or whistling from occurring, please be sure that the microphone is not too close to unit’s speaker. - Page 9 CD / CD+G OPERATION ABOUT CD-R/CD-RW DISCS This unit is CD-R/CD-RW compatible but playback capability may vary depending on the quality of the disc, the recording device and application software. Note: This unit is designed to play CDs bearing these identification logos. If CDs do not conform to the CD or CD+G standard, they may not play properly.
-
Page 10: Resetting The Unit
5. Press PLAY/PAUSE button when you have completed programming to start playing. You are now ready to start singing along. 6. Press STOP button twice or open the CD COMPARTMENT COVER to clear all the programmed entries. USING MICROPHONES/ECHO/BALANCE/AVC/DIGITAL KEY CONTROL •... -
Page 11: Specifications
not work normally Cable plugged into AUX IN jack. Remove AUX IN cable or the LED displays Disc is dirty. Wipe it clean with soft cloth. “ - - ” or “no ” Disc is scratched or warped Use a new disc. A non-standard disc is inserted. - Page 12 Due to continuing improvement, the features and the design are subject to change without notice. Karaoke Night products are designed and engineered by Marino Andriani, LLC 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A.