Table of Contents
Advertisement
9.
T o repeat a particular track, press the REPEAT BUTTON (#17) once or until the REPEAT INDICATOR
(#13) flashes.
10.
T o repeat the entire CD, press the REPEAT BUTTON (#17) twice or until the REPEAT INDICATOR (#13)
lights steadily.
11.
T o stop playing, press the STOP BUTTON
12.
When you wish to turn off the CD PLAYER, press the POWER BUTTON (#18) again. The POWER
INDICATOR (#14) will turn off.
This function allows the tracks to be played in a programmed sequence.
1.
In CD stop mode, press the PROGRAM BUTTON (#16) once. The PROGRAM INDICATOR (#11) will
flash and Program Channel Number "01" will appear and blink in the LED Display (#12) to prompt for
input.
2.
Press the
FORWARD-SKIP BUTTON
programmed.
3.
Press the PROGRAM BUTTON (#16) again to store selection. The Program Channel Number will
change to "02" and blink to prompt for input.
4. Press the
FORWARD-SKIP BUTTON
programmed and press the PROGRAM BUTTON (#16) to store selection.
5.
You may repeat steps 1 - 4 to program as many as 20 tracks.
6.
You may repeat the current programmed track or all programmed tracks by pressing the REPEAT
BUTTON (#17) once or twice.
7.
Press STOP BUTTON
8.
T o cancel programmed play, press the STOP BUTTON
9.
When you wish to turn off the CD PLAYER, press the POWER BUTTON again. The POWER INDICTOR
will turn off.
NOTES ON CD-R/RW DISCS
Because of the non-standardized format definition/production of CD-R/RW discs, playback quality &
•
performance are not guaranteed.
Manufacturer is not responsible for the playback ability of CD-R/RW discs due to recording conditions
•
such as PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
•
Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on
the unit.
Adjust the MASTER VOLUME CONTROL (#5) to desired listening sound level.
Adjust the MIC VOLUME CONTROL (#19) to obtain your desired voice level.
WARNING - Tapping or dropping the microphone can permanently damage your
microphone. Resist the urge to swing the microphone around by the cord.
You can play other music sources (iPod, MP3 or other digital audio players) through the speakers of
KN103 by connecting the AUX IN JACK (#24) to your external player's audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK (#24) and the other end of the cable to
the headphone jack of your digital audio
2. Turn ON the KN103 and your external audio device.
3. Start playing the device you plugged into the AUX IN JACK (#24).
4. Slowly adjust both the MASTER VOLUME CONTROL (#5) of your KN103 and the external device until
you reach a comfortable listening level.
Notes :
If you connect
the
KN103 to the AUX IN JACK (#24) of your external device, you only need to adjust the
•
MASTER VOLUME CONTROL (#5) of the KN103. If you connect to the Headphone Jack of your external
(#7).
CD PROGRAMMED OPERATION
(#9) or
BACK-SKIP BUTTON
(#9) or
BACK-SKIP BUTTON
(#7) once to stop playback.
SING ALONG OPERATION
AUX IN OPERATION
player.
E-5
(#15) to select the song
(#15) to select the next song to be
(#7) again in STOP mode.
to be
the
Advertisement
Table of Contents
