Virtualization Support Screen Options; Wireless Screen Options; Maintenance Screen Options - Dell Precision 3520 Owner's Manual

Option Description
Full Screen Logo This option will display full screen logo if your image match screen resolution
● Enable Full Screen Logo
Warnings and This option will cause the boot process to only pause when warnings or errors are detected.
Error
● Prompt on Warnings and Errors This option is enabled by default.
● Continue on Warnings
● Continue on Warnings and Errors

Virtualization support screen options

Option Description
Virtualization Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology: This option is enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O: This option is enabled by default.
Trusted This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
Execution hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution: This option is enabled by default.

Wireless screen options

Option Description
Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
● WWAN
● GPS (on WWAN Module)
● WLAN/WiGig
● Bluetooth
All the options are enabled by default.
Wireless Device Allows you to enable or disable the internal wireless devices.
Enable
● WWAN/GPS
● WLAN/WiGig
● Bluetooth
All the options are enabled by default.

Maintenance screen options

Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
NOTE: Error deemed critical to the operation of the system hardware will always halt the system.
NOTE: For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled
or disabled independently.
System setup options 69