Chapter 2: Disassembly And Reassembly; Recommended Tools; Subscriber Identity Module(Sim) Board; Installing The Subscriber Identification Module Card - Dell Precision 3520 Owner's Manual

Topics:
•

Recommended tools

•

Subscriber Identity Module(SIM) board

• Base cover
• Battery
• Solid State Drive
• Hard drive
• Coin-cell battery
• WLAN card
• WWAN card
• Memory modules
• Keyboard lattice and Keyboard
• Heat sink
• Power connector port
• Chasis Frame
• System board
• SmartCard module
• LED board
• Speaker
• Display hinge cover
• Display assembly
• Display bezel
• Display hinges
• Display panel
• Display (eDP) cable
• Camera
• Palm rest
Recommended tools
The procedures in this document may require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe-Recommended for field technician
Subscriber Identity Module(SIM) board

Installing the Subscriber Identification Module card

1. Insert Subscriber Identification Module (SIM) card removal tool or a paperclip into the pinhole [1].
2. Pull the SIM card tray to remove it [2].
3. Place the SIM on the SIM card tray.
10 Disassembly and reassembly
Disassembly and reassembly
2