Installing Display Assembly; Display Bezel; Removing The Display Bezel - Dell Precision 3520 Owner's Manual

Installing display assembly

1. Place the display assembly to align with the screw holders on the .
NOTE: Close the LCD before inserting the screws or turning over the laptop.
CAUTION: Route the display and antenna cable through the LCD hinge mount holes as LCD assembly is
inserted into the base, to prevent possible cable damage.
2. Tighten the M2x5 screws to secure the display assembly to the .
3. Turn over the .
4. Connect the antenna cables and display cable to the connectors.
5. Place the display cable bracket over the connector and tighten the M2x5 screws to secure the display cable to the .
6. Install the:
a. hinge cap
b. WLAN card
c. battery
d. base cover
7. Follow the procedure in

Display bezel

Removing the display bezel

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. WWAN card
d. WLAN card
e. hinge cap
f. display assembly
3. Pry the edges [1,2,3,4] to release the display bezel from the display assembly.
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 41