Wolf Rangetop Service Manual page 18

Component Removal and Installation
INSTALL THE SPARK MODULE (continued)
4 Connect the electrode wire to the spark module.
SPARK MODULE MOUNTING BRACKET REMOVAL
To remove the spark module mounting bracket, first remove:
Burner grate
1 above spark module mounting bracket to be
replaced
2 Burner caps
Burner assemblies
3
Burner pan
4 above spark module mounting bracket to be
replaced
5 Both spark modules on the spark module mounting bracket
to be replaced
Remove the Spark Module Mounting Bracket
1 Use a T-15 Torx bit to remove the screws from the spark
module mounting bracket.
2 Remove the spark module mounting bracket from the unit.
SPARK MODULE MOUNTING BRACKET INSTALLATION
Install the Spark Module Mounting Bracket
1 Place the spark module mounting bracket into the unit.
2 Use a T-15 Torx bit to install the screws into the spark
module mounting bracket.
WIRING COVER REMOVAL
To remove the wiring cover for a 48" unit, first remove on the
right-hand side:
1 Burner grate
2 Burner caps
Burner assembly
3
828990 REV. A
Sealed Burner Rangetop with Wok Service Manual
4
To remove the wiring cover for a 36" unit, first remove:
1
2
3
4
Remove the Wiring Cover
1
2
WIRING COVER INSTALLATION
Install the Wiring Cover
1
2
POWER CORD REMOVAL
To remove the power cord for a 48" unit, first remove on the
right-hand side:
1
2
3
4
5
To remove the power cord for a 36" unit, first remove:
1
2
3
4
18
Burner pan
Flat wok grate
Wok grate
Wok top plate
Wok frame assembly
1
Use a / " socket to remove the wiring cover mounting
4
screws.
Remove the wiring cover from the unit.
Place the wiring cover over the grounding plate.
1
Use a / " socket to install the wiring cover mounting
4
screws.
Burner grate
Burner caps
Burner assembly
Burner pan
Wiring cover
Flat wok grate
Wok grate
Wok top plate
Wok frame assembly
service.subzero.com