Knob Installation - Wolf Rangetop Service Manual

Component Removal and Installation
Burner Pan Installation (continued)
BURNER PAN INSTALLATION
Install the Burner Pan(s)
Place the burner pan(s) onto the unit.
KNOB REMOVAL
Remove the Knob
Pull the knob straight off of the shaft.

KNOB INSTALLATION

Install the Knob
Push the knob onto the valve shaft.
BEZEL REMOVAL
To remove the bezel, first remove:
1 Knob
Remove the Bezel
1 Use a T-15 Torx bit to remove the bezel mounting screws.
828990 REV. A
Sealed Burner Rangetop with Wok Service
2 Remove the bezel from the bullnose.
BEZEL INSTALLATION
Install the Bezel
1 Place the bezel over the bullnose.
2 Use a T-15 Torx bit to install the bezel mounting screws.
BULLNOSE REMOVAL
To remove the bullnose, first remove:
Burner grate(s)
1
All burner caps
2
All burner assemblies
3
Burner pan(s)
4
All knobs
5
6 All bezels
Remove the Bullnose
5
1 Use a / " socket to remove the nuts holding the bullnose
16
mounting brackets to the bullnose PEM studs.
13
service.subzero.com
(one for 36" units, two for 48" units)
(one for 36" units, two for 48" units)
Manual