Furuno FM-4850 Operator's Manual page 96

FM-4850 Operator's Manual
Wiring
Remove the antenna connector cover on the rear back of the unit.
Step 1
Insert the antenna cable into the antenna connector.
Step 2
Tighten the antenna hand tight.
Step 3
Secure the cable with the electrical cable.
Step 4
Waterproofing the Connection
To waterproof the connection, refer to the procedures outlined below. By
waterproofing the connection, the IPx7 rating can be maintained.
Take the Self-bonding tape in the length of about 100 mm.
Step 1
Connect the VHF antenna to the radio and tighten it clockwise.
Step 2
Slightly stretch one end of the Self-bonding tape and wind it clockwise on
Step 3
the antenna head.
Wrap around the cable.
Step 4
87
INSTALLATION