Table of Contents
Advertisement
8-2-3-1. 3G/HD/SD-SDI Input Format
◆
SD/HD to HD Mode, HD to 4K Mode
Touch 3G/HD/SD-SDI INPUT (1 in the SYSTEM diagram, see Sec. 8-2-3) to open a window
as shown below.
Refer to the table below to select an input signal format, then touch OK.
Touch Cancel to cancel the change.
Setting Range
Menu
(Highlighted: Default)
Auto
Mode
Manual
1080p
1080i
Resolution
720p
SD (525/625)
60
59.94
50
Frame/Field
30
Rate
29.97
25
24
23.98
Level-A
3G-SDI
Level
Level-B
*
Output images will appear distorted if Input Format, Output Format or Genlock Select is
changed and flickering may occur on another video output channel. It is recommended to
change Input Format from AUTO to a fixed format (Manual) as soon as the input and
output formats are determined.
Descriptions
Selects an input signal format.
Auto: Automatically detects the input signal to
process. When invalid video signal is input,
black will be output.
Manual: Manually sets the input signal format using
the following parameters. When another format
signal is input, black will be output.
Selects the input signal resolution.
(SD (525/625) available only in SD/HD to HD mode.)
Selects the input signal frame/field rate.
If Resolution is set to SD and Frame Rate is set to
other than 50, Frame Rate is automatically changed
to 59.94.
If Resolution is set to 1080p, select the 3G-SDI
signal level.
76
Advertisement
Table of Contents
