Handy Needle Threader - Janome CoverPro 3000 Instruction Book

z
x c
r
v
b
t

Handy Needle Threader

z Hold the grip of the threader with the triangle mark up.
Insert the thread into the slit of the Y-shaped notch.
q Triangle mark
w Y-shaped notch
q
w
e
x Place the V-shaped notch over the needle just above
the needle eye.
c Slide the threader down along the needle while
pushing it against the needle, until the threader pin
enters into the needle eye.
e V-shaped notch
v Push the threader and the thread will go through the
needle eye.
r Threader pin
b Remove the threader from the needle. Then pick up
the loop of the thread with the hook. Pull the thread
end out to the back.
t Hook
21