BX 1870, BX2370, BX2670, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203A, LA243A, WSM
[BX631 5 Q U I C K CO U P LER]
[BX631 4 PALLET FO R K]
9Y1 21 08551CI009US
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels.
4. I f a component with danger, warning and caution label(s) affixed is replaced with new part, ma ke sure new label(s)
is (are) attached in the same location(s) as the replaced component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles to
outside edge.
(1)
(1) Part No. 7J619-3616-1
A LOCKP I N , I N STALLED
B SNAPPER PIN. INSTALLED
1 AGAJBJAP044E
(2) Part No. 7J61 2-3923-1
A DANG E R
PALLET FORK
SPECI FICATION
• Rated capacity
LA203{A)
: 1 80 LBS. ( 82 kg)
LA243(A), LA240(A):310 LBS. (1 42 kg)
• The distance to its centerof gravity
from the attachment face
LA203(A), LA243(A). LA240(A)
: 1 7.6 in(448 mm)
• The weight of the attachment
·90 LBS.(41 kg)
TO AVO I D PERSONAL
INJURY OR DEATH
CAUSED BY ROLLOVER
• Do not exceed rated
load listed above.
•Use rear implement and tire
ballast recommended in loader
operator's manual.
•Operate tractor slowly
taking special care
when turning.
1 AIABCDAP035A
1-12
INFORMATION
(3) Part No. 7 J246-5643-1
A DANGER
9Yl210855INI0010USO
9Yl210855INI0005US0
KiSC issued 08, 2013 A