Fault Backup Control - Mitsubishi Electric AHU-KIT-SP Manual

10. Fault backup control

・In cascade control, fault backup control is automatically enabled.
・When an abnormality occurs in an outdoor unit during operation, another outdoor unit automatically starts operating.
・Even if the outdoor unit that stopped abnormally is restored, the operation of the outdoor unit does not change.
・An example of fault backup control is shown below.
MODEL NAME
Air Handling Unit Interface
MODEL TYPE
AHU-KIT-SP
ISSUE CLASSIFICATION
SPECIFICATION
MORIKAWA
DWG NO.
REV.MARK PAGE
PSZ000Z308
21.09.17
19/38