2.12 NVRAM/Serial EEPROM Write Enable Link (P5 3-4)
This link enables or disables writes to the NVRAM and I
may be read back in the EPLD
Table 2-11 Link P5 3-4
Link
Out
In
2.13 Spare Link (P5 5-6)
This link is reserved for future use. Its status may be read back in the EPLD
Configuration Register
Also see the
2.14 Special Linking Requirements
For 'deployed-use', any of the nine links on P3, P4 and P5 can be permanently made
using zero Ohm, 0402 resistors. Consult the factory for individual requirements.
Publication No. IMP2B-0HH/5
Function
NVRAM writes disabled
NVRAM writes enabled
NOTE
This link write-enables the I
2
1.
'Limited Host, Full PMC User I/O' Mode
Configuration Register
C EEPROM in conjunction with a bit in the EPLD
C Serial EEPROM. Its status
2
1.
Control Register
section.
Configuration 15
1.