To Add A Transponder - EchoStar DSB-1200 Viaccess User Manual

8. Enter the required settings.
9. Read the available help text for information.
10. Go to the continue field.
11. On the RCU, press the OK key to advance.
12. Make the required selections, it is advised to
select the search mode as TP.
13. Read the available help text for information.
14. Monitor the signal indicator and make sure that
you have sufficient signal strength and quality.
15. After you found the location, press the OK key to
confirm the position.
16. Go to the Search Channels field.
17. On the RCU, press the OK key to advance.
18. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
19. On the RCU:
a. press the OK key to end the procedure;
b. press the EXIT key to return to live video.

2.8. TO ADD A TRANSPONDER

1. Select a channel of the satellite to which you
want to add a transponder.
2. On the RCU, press:
a. the OK key;
b. Select Mode = TV
c. Select List = All Channels
d. Select Group = None
e. Select Sort = None
f. Select Edit = Add TP
3. On the RCU, press the OK key.
Digital Satellite Receiver
Maintenance
Section 6
Page 6 - 5
6