Advertisement
Available languages
Available languages
mask, non-skid safety shoes, hard hat, and hearing
protection will reduce personal injury.
Tool Use and Care
• Do not use the laser if the Power/Transport Lock
switch does not turn the laser on or off. Any tool that
cannot be controlled with the switch is dangerous
and must be repaired.
• Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of
electric shock or injury.
Battery Safety
WARNING:
Batteries can explode, or leak, and
can cause injury or fire. To reduce this risk:
• Carefully follow all instructions and warnings on the
battery label and package, and the accompanying
Battery Safety manual.
• Do not dispose of batteries in fire.
• Keep batteries out of reach of children.
• Remove batteries when the device is not in use.
• Use only the charger specified for your rechargeable
battery pack.
• Disconnect the battery pack from the laser before
making any adjustments, changing accessories, or
storing the laser. Such preventative safety measures
reduce the risk of starting the laser accidentally.
• Use the laser only with specifically designated
battery packs. Use of other battery packs may create
a risk of injury and fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
• Do not use a battery pack or laser that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion, or risk of injury.
• Do not expose a battery pack or laser to fire
or excessive temperature. Exposure to fire or
temperature above 265° F (130° C) may cause an
explosion.
• Follow all the charging instructions and do not
charge the battery pack outside of the temperature
range specified in the instructions. Charging
improperly or at temperatures outside of the
specified range may damage the battery and
increase the risk of fire.
Powering the Laser
This laser can be powered by either a DEWALT 12 V
or 18V Li-ion Battery Pack.
Battery Type
12V
DCB120, DCB121, DCB122,
DCB124, DCB127
18V
DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B,
DCB185, DCB187, DCB189
Use of any other batteries may create a risk of fire.
Charging the Li-ion Battery
If the DEWALT 12V/18V Li-ion battery pack is
1.
attached to the laser, remove it.
• While pressing down on the release button on
the battery pack (Figure
pack up to unlock it from the laser.
• Pull the battery pack the rest of the way up and
out of the laser (Figure
Plug the charger cord into an electrical outlet.
2.
Slide the battery pack into the charger until it snaps
3.
in place (Figure
A 1
Battery Pack
), pull the battery
B 1
).
B 2
). On the charger, the left
GB
13
Advertisement
