Table of Contents
Advertisement
batteries as they will explode at high
temperatures.
• Do not look into the air vents when the
unit is switched on, as sometimes
there is a possibility of small debris being
discharged from the air vents, especially
after cleaning / replacement of the
filters as debris inside the unit can be
disturbed.
ADDITIONAL SAFETY
WARNINGS
a) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to battery
pack, picking up or carrying the
appliance. Carrying the appliance with
your finger on the switch or energizing
appliance that have the switch on invites
accidents.
b) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
c) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
d) Do not use a battery pack or
appliance that is damaged or
modified. Damaged or modified
batteries may exhibit unpredictable
behavior resulting in fire, explosion or
risk of injury.
e) Do not expose a battery pack or
appliance to fire or excessive
temperature. Exposure to fire or
temperature above 266°F (130°C) may
cause explosion.
f) Have servicing performed by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the product is
maintained.
WARNING:
modify or repair the appliance
SEE PAGE 8 FOR OPERATION
Do not attempt to
SAVE THESE INSTRUCTIONS
Symbols
• The label on your tool may include the
following symbols. The symbols and their
definitions are as follows:
V ..................volts
A ..................amperes
Hz ................hertz
W .................watts
min ..............minutes
or AC ......alternating current
or DC ..direct current
n o ................no load speed
................Class I Construction
(grounded)
................earthing terminal
...............safety alert symbol
................Class II Construction
(double insulated)
.../min or rpm... revolutions or
3
reciprocation per minute
Advertisement
Table of Contents
