Ec Declaration Of Conformity; Rohs Compliance Declaration - Parweld XTT-182 DV Operator's Manual

9.0 EC declaration of conformity

This is to certify that the tested sample is in conformity with all provisions of the above detailed EU directives and product standards.

9.1 Rohs Compliance Declaration

The above listed products are certified to be compliant with the rohs directive with all homogeneous component parts being controlled to
It should be noted that under specific exempted applications, where lead is used as an alloying element the following limits are applied in
Only dispose off in authorised sites for electrical and electronic waste do not dispose of with general refuse or landfill waste.
16
www.parweld.com
Hereby we declare that the machines as stated below
Harmonised European standard: EN/IEC 60974-1
Directive 2011/65/EU of the European Parliament
Restriction of use of certain hazardous substances in electrical and electronic equipment
ensure material contents as per the list below.
Hexavalent chromium 0.1% by weight
Polybrominated biphenyl's (pbbs) 0.1% by weight
Polybrominated diphenyl ethers (pbdes) 0.1% by weight
Copper and copper alloy parts use less than 4% by weight of each homogeneous component.
Steel and steel alloy parts use less than 4% by weight of each homogeneous component.
Aluminium and aluminium alloy parts use less than 4% by weight of each homogeneous component.
Conform to the EC Directives:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Type: XTT-182DV
Cadmium 0.01% by weight
Lead 0.1% by weight
Mercury 0.1% by weight
accordance with the regulations.
Jonathan Websdell
Technical Manager