Download Print this page

Mitsubishi Electric MSZ-RW25VG Operating Instructions Manual page 15

Hide thumbs Also See for MSZ-RW25VG:

Advertisement

Available languages

Available languages

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with luke-
warm water to the specifi ed concentration, then wipe off the detergent with a
damp towel.
Air fi lter
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
Front panel
Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel
securely and press the positions indicated by
the arrows.
This information is based on REGULATION (EU) No 528/2012
Treated Article
MODEL NAME
(Parts name)
FAN
AIR DUCT
MSZ-RW25/35/50VG
HORIZONTAL VANE
VERTICAL VANE
MAC-2490FT-E
FILTER
Active Substances
Property
(CAS No.)
Tebuconazole (107534-96-3)
2-octyl-2H-isothiazol-3-one
Antimold
(OIT) (26530-20-1)
Dimethyloctadecyl[3-
Antivirus
(trimethoxysilyl)propyl]
Antibacterial
ammonium chloride
Antimold
(27668-52-6)
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not use water hotter than 50°C.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air purifying device
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by
vacuum cleaning:
• Soak the fi lter together with its frame in
lukewarm water and rinse it.
• After washing, dry it well in shade.
Deodorizing fi lter, black
Every 3 months:
• Remove dirt by a vacuum cleaner, or soak the framed fi lter in lukewarm
water (30 to 40°C) for about 15 minutes. Rinse well.
• After washing, dry it well in shade.
• Deodorizing feature recovers by cleaning the fi lter.
When dirt or smell cannot be removed by cleaning:
• Replace it with a new air cleaning fi lter.
• Parts Number
MAC-3010FT-E
or
V Blocking Filter, green, option
Every 3 months:
• Remove dirt by a vacu-
um cleaner.
When dirt cannot be
removed by
vacuum cleaning:
• Soak the fi lter and its
frame in lukewarm wa-
ter before rinsing it.
• After washing, dry it well
in shade. Install all tabs
of the air fi lter.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
MAC-2490FT-E
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
• Do not touch the i-see sensor.
• The air purifying device does not function for safety for
a couple minutes after the operation starts or the front
panel is opened/closed.
• Do not disassemble the air purifying device.
• Do not touch any parts other than the frame of the air
purifying device.
Instruction for Use
(Safe handling information)
• Use this product in line with the instruction manual indications
and for the intended purpose only.
• Do not put into mouth. Keep away from children.
• Use this product in line with the instruction manual indications
and for the intended purpose only.
• Do not put into mouth. Keep away from children.
Important
EN-14
EN

Advertisement

loading