Using The Control Wheel - Sony DSC-RX10M3 How To Use Manual

4. Select your desired geographic location, and then press
5. Select a setting item using the up/down side of the control wheel or by turning
the control wheel, then press
6. Set [Daylight Savings], [Date/Time], and [Date Format] using the
up/down/left/right sides, then press
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
7. Repeat steps 5 and 6 to set other items, then select [Enter] and press
the center.
To cancel the date and time setting procedure, press the MENU button.
Note
If the date and time setting is cancelled halfway, the setting screen for the date
and time appears every time you turn on the camera.
[20] How to Use

Using the control wheel

You can select setting items by turning or pressing the top/bottom/right/left side of
the control wheel. Your selection is determined when you press
of the control wheel.
The DISP (Display Setting) is assigned to the top side of the control wheel. You
can assign selected functions to the left/right/bottom side of the control wheel or to
in the center, and to the rotation of the control wheel.
During playback, you can display the next/previous image by pressing the right/left
Confirming the operation method
in the center.
in the center.
Confirming the operation method
.
in
on the center