Basic Call Features
2. Press the number.
3. Press
or press the Send soft key, then the call is sending.
To place a call by call history or Directory
1. Press the History soft key (On the idle page) or Menu -> History /Directory
2. Press
and
to select the targeted one.
3. Press Send soft key to make the call.
Note:
1. The
key is set to be a send key. You can set the * key as send key or set
some other to
be as send keys. For more information, refer to the Key as Send on page
2. During the call, you can also change among Headset, Handset or Free-speaker mode.
End a Call
Here shows to end a call during three mode:
To end a call by Handset
1. Press the Cancel soft key or hang up the handset.
To end a call under Headset Mode
1. Press the Cancel soft key or press
.
To end a call under hands-free speakerphone Mode
1. Press the Cancel soft key or press
.
Note:
1. During the conference, to end the call is same as mentioned above.
Redial a Call
To redial the last placed call from the IP Phone
Press
directly when LCD is on the idle interface.
SAS HENRI DEPAEPE - 75/77 Rue du Pré-Brochet - 95110 Sannois - France
Tel +33(0)1 3025 8160 - Fax +33(0)1 3998 6124 -
contact@depaepe.com
36
Need help?
Do you have a question about the UC862 and is the answer not in the manual?
Questions and answers