Table of Contents
Advertisement
Basic Features Configuration
Note:
All languages may not be available for selection. The available languages depend on the language
packs currently loaded to the IP phone.
Time and Date
The time and date show on the idle page, and it can be set and change by SNTP server
automatically or manual setting.
To configure the time and Date by SNTP setting
1. To press Menu -> Setting -> Basic setting -> Time & Date -> SNTP Settings
2. Press
or
, or
to change the Time zone.
3. Fill the NTP server1, NTP Server2, and Daylight Saving.
4. Press
or Save soft key to save the configuration.
Note:
Press
, all zone will show on the display, select the one you want and press save or confirm
key to save the configuration.
To configure time and date manually
SAS HENRI DEPAEPE - 75/77 Rue du Pré-Brochet - 95110 Sannois - France
Tel +33(0)1 3025 8160 - Fax +33(0)1 3998 6124 -
contact@depaepe.com
22
Advertisement
Table of Contents
Need help?
Do you have a question about the UC862 and is the answer not in the manual?
Questions and answers