2. Setting procedure of the machine head
* This item has been factory-adjusted at the time of shipment. Carry out the machine head setting procedure
in the case the control box is replaced, or in any case where it is necessary.
❾
– 21 –
1) Refer to
"III-6. Setting of functions" p.26
call the function setting No. 95.
switch .
2) Press
3) Select the machine head type by pressing
switches ❾.
and
For DDL-900A
dL90
4) After the selection of the type of the machine
switch to confirm the se-
head, press
lection. The settings are automatically initialized
according to the type of the machine head.
and