iHome iBT90 Instruction Manual page 6

3. To review the charging status of the unit while it is charging, press and
hold the
from bottom to top for 5 seconds to show unit is charging.
Reviewing Battery Charge Level
(Charger is Disconnected and unit is ON)
1. Press and hold the
charging (micro USB cable not connected) to enter Battery Review
Mode. The cabinet lights will blink and built-in voice will announce the
current battery level.
Charging Devices Via USB Out Port (Charger is Disconnected
and unit is ON)
NOTE: The iBT90 will only charge devices when operating on the
internal battery (when NOT connected to power source via the USB
POWER IN port).The unit must be powered ON to charge devices via the
USB Out Port. To charge devices via USB while operating on the internal
battery, we recommend that the unit be fully charged first. The iBT84 will
not charge external devices via USB when internal rechargeable battery is
too low (red indicator is blinking). To save battery power, USB charging is
limited to 1 hour when no audio is playing.
1. Lift splashproof cover on the back of the unit to expose the USB Out
Port.
2. Connect the standard size end of a USB cable (not included) to the
USB Out Port and connect the other end to the charging port on your
device.
3. Press and hold the Power On/O
unit ON.
4. Some devices require more power than the 1 Amp the USB Out Port
provides. Monitor the charging progress on your deivice. If your
device does not charge, use the charger that came with it.
Color Mode Button. The cabinet lights will flash green
Color Mode Button when unit is ON but not
Button for 2 seconds to turn the
iBT90
5