Table of Contents
Advertisement
Quick Links
C6830A/B
v1.0
PFC programmable charger
High efficiency wide input voltage
90V~265VAC Input
For 16S LiPo, 18S LiFe battery
1~30Amps 1500W max.
T
hanks for your purchasing the intelligent and powerful charger.
R
ead the ENTIRE instruction manual to become familiar with the features/functions of the device
before operating.
F
eel free to send an email to
jasonwang3a@163.com
or call at 86 755 2643 6165 should you have
any questions and suggestions.
Jason Wang
©
2021 Chargery Power Co., Ltd.
July 16, 2021
Add: Room 212-216, Zhongxing Industrial Zone NanShan 518052 ShenZhen, China
Tel: +86 755 2643 6165, Fax: +86 755 2641 2865, Email: Jasonwang3a@163.com
Advertisement
Table of Contents
Related Manuals for Chargery C6830A
Summary of Contents for Chargery C6830A
- Page 1 86 755 2643 6165 should you have any questions and suggestions. Jason Wang © 2021 Chargery Power Co., Ltd. July 16, 2021 Add: Room 212-216, Zhongxing Industrial Zone NanShan 518052 ShenZhen, China Tel: +86 755 2643 6165, Fax: +86 755 2641 2865, Email: Jasonwang3a@163.com...
- Page 2 C6830A v1.0, C6830B V1.0 High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Features The Battery Charger has been designed to provide reliable, quality charging for battery systems in electric drive vehicles. It is a high efficiency wide input voltage charger, the charger can output 1500W at AC90V~265V in a smaller size.
-
Page 3: Protection Functions
Anti spark on battery connection even 100V battery connect to charger Reverse polarity protection of battery connection Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS Main battery type and cell count Terminal charge Voltage per cell... - Page 4 C6830A v1.0, C6830B V1.0 High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Warning 1. For any lithium battery, such as LiPo, LiFePO4, Li-ion, LiTo and other Li battery, the PCM (Protection Circuit Module), BMS, cell monitor, saver etc.
- Page 5 C6830A v1.0, C6830B V1.0 High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Battery type, cell count and rated voltage table cell count/Battery Pb/VRLA/Gem LiPo,V Li-ion,V LiFePO4,V LiTo,V rated voltage battery,V 15.4...
- Page 6 1~30Amps 1500W max. Operation Instructions 1. Connect C6830A/B to AC 110 / 220V outlet by the special heavy power cable, if use other brand cable, please note the wire AWG must be AWG14 at least. 2. Connect battery to charger.
- Page 7 C6830A v1.0, C6830B V1.0 High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. 7. Setup the charger work at Auto mode (only for C6830B), Finish all charge settings, alternate Auto charge YES and press Knob for 3 seconds, the charger will start to charge, and work at Auto mode in future till disable it.
- Page 8 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. All parameters will be remembered by the C6830A/B till next change. Choose battery type, and press knob for 3 seconds start to charge at last setup Auto mode operation instructions When you need charge same one battery repeat, you can set up Auto Charge is yes (Only for C6830B), the charger will charge automatically next time, need not setup any parameters.
- Page 9 1~30Amps 1500W max. Remote control charge Mode COM1 is on the bottom of charger, connect to Chargery BMS, the charge current will be controlled by BMS when any cell voltage reach OVP. For C6830A, the charge current can be controlled by external PWM, Battery connector is as below, two heavy terminal connect to battery positive and negative separately, there are two slim terminal in middle of connector, it connect to external device.
- Page 10 10A, end current is setup to 10%, the end current is 1A. d) Set up end voltage, the voltage is cell voltage NOT battery pack total voltage, it must be under or same as OVP on BMS. C6830A will charge at constant voltage when total battery voltage reach cell count*setup value.
-
Page 11: Program Setup
5min, LCD back-light will be off to save the power, press knob resume the back-light. Temp. Unit ℃ or ℉, ℃ Setup the Temperature unit, default ---> ℃ Note: All parameters will be remembered by the C6830A/B till next change. www.chargery.com page total... - Page 12 C6830A v1.0, C6830B V1.0 High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. As power supply On Battery type interface, choose power supply setup output voltage and maximal output current, the charger will work as a programmed power supply;...
-
Page 13: Mechanical Characteristics
Over charge power protection, 1500W max. Over temperature protection, 90℃ max. Short- circuit protection on output. Prevent any cell from over charging, adjust charge current automatically fit with Chargery BMS Mechanical Characteristics Size： 281*170*68 (L×W×H, mm) or 11.1×6.69×2.68 (L×W×H, inch) ... -
Page 14: Packaging Information
For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Packaging Information C6830A/B base unit: 1pcs Power cable: 1pcs Communication wire: black, 1pcs XT-90 female connector: 1pcs, for C6830A XT-90I female connector:1pcs, for C6830B www.chargery.com page total... - Page 15 1~30Amps 1500W max. Total solution on E-Vehicle application Chargery BMS is a successful combination with the charger C6830. When all cell voltage reach setup value, BMS communicate with charger, the charger continue to charge at a smaller current rather than stopping charging.
-
Page 16: Error Information
Battery voltage over setup, the charger will be power off Battery Vol. High Output current over 2A of setup for 2 seconds, C6830A/B Over Current turn off automatically and turn on manually Output voltage over 2V of setup for 2 seconds, C6830A/B... -
Page 17: Related Parts
High efficiency wide input voltage PFC programmable Charger 90V~265VAC input For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Related parts The following parts are similar to the C6830A/B and maybe of interest: MODEL DESCRIPTION COMMENTS C10325 4S-24S battery charger... -
Page 18: Application Notes
Application Notes. Storage Energy System If C6830A/B charger applied to large capacity energy System such as PV system, C6830A is suggested, the charge current can be controlled by remote device. The C6830A can receive PWM signal and adjust charge current. -
Page 19: Order Information
Normal charge mode, Setup battery type, cell count and all charge √ √ parameters √ √ Power supply mode, 12-55V adjusted, 1-55A adjusted √ √ BMS control charge, Charge current controlled by Chargery BMS, prevent any cell voltage from over charged Version history Version V1.0 First released www.chargery.com page total... -
Page 20: Warranty And Service
For 16S LiPo,18S LiFe,24S LiTo battery 1~30Amps 1500W max. Warranty and Service Chargery Power Co., Ltd. as manufacture of R/C, E-Vehicle and UAV power warrants C6830A/B charger to be free of defects in material and workmanship. This warranty is effective for months from date of purchase.