Table of Contents
Advertisement
When the mesh filter gets dirty badly, clean it in the
following procedures.
1.
Turn the mesh filter counterclockwise and remove
it while the hooks are unlocked.
Fig.43
► 1 . Mesh filter 2. Hook
2.
Remove the dust on the mesh filter and then wash
it with water. After that, dry it thoroughly.
3.
Insert the mesh filter into the base while the hooks
are aligned with the port. Turn the mesh filter clockwise
until the hooks are locked with a click. Make sure that
the mesh filter is installed securely.
Fig.44
► 1 . Mesh filter 2. Hook 3. Port
2
1
1
2
3
18 ENGLISH
Advertisement
Table of Contents
