Table of Contents
Advertisement
Clearing the clog
When clearing the clog, remove the hose or the exten-
sion wand, or the bent pipe assembly to check inside.
Removing/attaching the snap-on type bent pipe
assembly
To remove, pull the bent pipe assembly while pressing
both of the tab on the hose end.
To attach, insert the hose end into the bent pipe assem-
bly. Make sure that the tabs on the hose end snap into
the holes on the bent pipe assembly.
1
2
Fig.37
► 1 . Hose end 2. Tab 3. Hole 4. Bent pipe assembly
Removing/attaching the screw-in type bent pipe
assembly
To remove, loosen the sleeve of bent pipe assembly
from the hose.
To attach, fasten the sleeve of bent pipe assembly onto
the hose.
1
Fig.38
► 1 . Hose 2. Bent pipe assembly 3. Sleeve
4
3
2
3
16 ENGLISH
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Hose (for vacuum cleaner type)
•
Hose (for dust extraction type)
•
Extension wand
•
Free nozzle
•
T-shape nozzle
•
Seat nozzle
•
Corner nozzle
•
Shelf brush
•
Round brush
•
Bent pipe assembly
•
Filter bag
•
Dust bag
•
Front cuff
•
HEPA filter
•
Pipe
•
Cyclone attachment
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Cyclone attachment
NOTE: When using the cyclone attachment with this
appliance, the bent pipe is also requied.
1
Fig.39
► 1 . Cyclone attachment
Advertisement
Table of Contents
