Daikin Perfera CVXM20A3V1B Installer's Reference Manual page 28

6 | Unit installation
Installer reference guide
28
5×
10 Drill a wall hole, depending on which side piping is taken out. See
4
drill a wall hole" [ 30].
11 Open the front panel and remove the front grille (see
4
unit" [ 24]).
12 Remove the slit portions using nippers. See
4
portions" [ 30].
13 If necessary for the skirting board, remove the slit portion on the bottom
frame.
a Bottom frame
b Slit portion
14 Align the unit using the alignment symbol
375 mm from the alignment symbol to the each side (unit width 750 mm),
487 mm from the alignment symbol to the bottom of the unit.
15 Hook the unit on the mounting plate and secure the unit to the wall using 4
screws M4×25L (field supply).
4×
"6.2 Opening the indoor
"6.3.3 To remove the slit
a
b
on the mounting plate:
a
CVXM20A + FVXM25~50A
Split system air conditioners
4P625991-1C – 2021.09
"6.3.2 To