Efco Swaploader SL-330 Parts And Operation Manual page 50

REAR BUMPER ASS'Y w/ EXTENSIONS
Weld the bumper weldment to the vertical channels (See Fig. 1 & 3).
5.
FIG. 2
MATERIAL LIST
ITEM QTY P/N DESCRIPTION
1 1 52H12 REAR BUMPER WDMT
2 2 63H94 VERTICAL CHANNEL
3 1 52H13 REAR BUMPER EXTENSIONS
1800 NE Broadway Avenue, Des Moines, Iowa, U.S.A. 50313-2644
Phone: (515) 266-3042 • Fax: (515) 313-4426 • Toll Free: (888) 767-8000
E-Mail: sales@swaploader.net • Web Site: www.swaploader.com
(52H11 with 52H13 Extensions)
INSTALLATION INSTRUCTIONS (continued)
WT lb.
PER EA.
95.66
9.58
58.42
TOTAL 173.24
ADDITIONAL NOTES:
1. Prior to any welding, consult the
truck manufacture for any special
precautions that may need to be
taken. Typically the batteries must be
disconnected and the ground lead
from the welder should be as close to
the part being welded to avoid the
possibility of arcing across bearings,
gears, etc.
All welds should be done utilizing a
2.
low hydrogen welding process.
TRUCK FRAME
(REF)
2
1
3
FIG. 3
05OCT09