DESCRIPTION
Upper tube
Middle tube
Boot
Carriage bolt, 1/4 x 3/4 in.
Flange nut, 1/4 in.
Pin
Hairpin cotter pin
Decal
Operator's manual
Installing the Quick Hitch
1. Raise the rear of the tractor and support with jack
stands.
Danger
Mechanical or hydraulic jacks may fail to support
machine and cause a serious injury.
Use jack stand when supporting machine.
Do not use hydraulic jacks.
2. Remove both rear tractor wheels (Fig. 2).
QTY.
1
1
1
3
Installing the discharge tubes
3
1
1
1
Installing the decal
1
Read before operation
1
2
1. Tractor
2. Tire
3. Install the quick hitch to the tractor using 2 carriage
bolts (3/8 x 1 in.) in the rear holes and secure with 2
locknuts (3/8 in.) (Fig. 3).
4. Install 2 carriage bolts (1/2 x 1–1/4 in.) in the front
holes. Secure bolts with 2 locknuts (1/2 in.) (Fig. 3).
6
USE
Figure 2
3. Lug
3
m-5947